NFC + QR tiles · Australian made · Delivered Australia-wide
Compatibility

Which phones can tap an NFC tile, and what happens when they do

Every iPhone from the XR onwards and most Android phones read NFC tiles from the lock screen. Here is the list, the exceptions, and what the customer sees.

By Shortfield 4 min read

A hand holding a phone against a white Bare Bean Coffee tile reading "Tap to leave a review", standing on a wooden café counter

The first question every venue asks about a tap tile is whether their customers’ phones can use it. The short answer is that almost all of them can, and the ones that cannot can scan the QR code on the face instead. The longer answer, with the exceptions, is below.

iPhone

iPhone XR, XS and every model since (2018 onwards) read NFC tags in the background. The customer holds the top of the phone near the tile, a notification appears at the top of the screen, and tapping it opens the link. Nothing has to be unlocked or opened first. This includes every iPhone 11, 12, 13, 14, 15, 16 and 17 model, the SE from 2020 onwards, and the mini, Plus, Pro and Pro Max variants.

iPhone 7, 8 and X have NFC but need an app open to read a tag, so a tile does not open on its own. These customers scan the QR code.

iPhone 6s and older cannot read tags at all. The QR code catches them too.

Background reading pauses while the camera is open, while Wallet is open, and in Airplane Mode. If a customer taps and nothing happens, the camera is usually why: they were about to scan the QR code.

Android

Most Android phones sold since 2018 have NFC and read tags from the lock screen or home screen. Samsung Galaxy S and Note series, Google Pixel, OnePlus, Motorola Edge, Oppo Find and Reno, and the mid and upper ranges from Xiaomi, Vivo and Realme all do.

Budget Android phones sometimes leave NFC out to save cost. Samsung Galaxy A0x and some A1x models, Motorola G Play and E models, and many phones under about $250 do not have it. Look for NFC in Settings under Connections or Connected devices. If it is not listed, the phone does not have it.

NFC can be switched off. On Android it is a toggle, and some people turn it off to save battery. The customer switches it on in Settings, or in the quick settings pull-down on most phones.

The tile is read when the back of the phone, usually the upper half, is held against it. On Android the link opens directly or after a single confirmation, depending on the phone.

What the customer sees

  1. They hold the phone against the tile. It does not need to touch; a centimetre or two is fine, through any normal case.
  2. Within a second, a notification appears: on iPhone a banner at the top, on Android a prompt or the page itself.
  3. They tap the notification and the page opens in their browser: your review form, your menu, your Wi-Fi details, your booking page.

Nothing is installed. Nothing is left on their phone afterwards except a page in their browser history. The tile does not know who tapped it, only that it was tapped.

What can block a tap

  • Metal. A phone in a wallet case with a metal plate can stop the signal; the customer takes the phone out. A tile fixed directly to a steel surface can read less reliably too, so on a metal counter or post use the backing rim or a stand to lift it a few millimetres off the metal.
  • Thick glass. A tile under a glass table top thicker than about 8mm is too far from the phone. Put the tile on top.
  • Position. The phone’s NFC reader is at the top on an iPhone and around the middle or top on most Androids. A customer who holds the bottom of the phone to the tile gets nothing. “Hold the top of your phone here” solves it.

The QR code covers the rest

Every Shortfield tile can carry a QR code on the face pointing at the same link as the chip. For the customer with an iPhone 8 or a budget Android, it is the way in. For everyone else it is a hint that the tile does something. We recommend including it on any tile the public will use; see NFC vs QR codes for when each wins.

Frequently asked

Do customers need an app? No. Reading a tag is built into the phone.

Does it work on tablets and watches? iPads have no NFC reader for tags. Apple Watch and Android watches do not read tags either. Phones only.

Will it work in five years? NFC is the same standard that contactless payment uses, and every phone maker has committed to it. A tile made today will be read by the phones of 2031.

Can I tell how many people tapped? Yes. Tap counts appear in your Shortfield account for each tile, so a tile that is badly placed shows up as one with no taps.

More guides

All guides →
See it rendered before you buy Design yours